What Difficulties in Installing a Normally Open Solenoid Valve Do You Need to Know About?

A normally open solenoid valve is divided into two structures, direct and core. With a unique structural design, different rubber seals can be selected according to different sealing parts, achieving zero leakage.

Difficulties in installing a normally open solenoid valve:

1. Before installation, please refer to this product's instructions to ensure it meets your requirements.

2. The pipeline must be clean before use; substances that cannot be removed should have a filter installed to prevent sediment from hindering the normal operation of the solenoid valve.

3. For a solenoid valve that has been shut down for a long time, the liquid-use normally open solenoid valve should be cleaned promptly after cooling for convenient use; during disassembly, first arrange the parts in order, and then assemble.

4. A solenoid valve generally operates on one side and cannot be reversed; its arrow indicates the flow direction of the fluid in the pipeline, and it should be kept consistent as much as possible.

5. When a cylinder 5-position one-way solenoid valve is used again, the solenoid valve should be heated or provided with heat insulation protection.

6. A solenoid valve is generally a horizontal oil passage plate, with the magnet coil vertically upward; some products can be assembled at will, but if conditions permit, the vertical method should be adopted to extend its service life.

7. After the magnet coil transformer ground wire (RF contact) is connected, its firmness should be checked; the contact surface of the connected electrical components must not shake. Looseness will cause the solenoid valve to fail. During manufacturing, solenoid valves should be used frequently; for example, an air-conditioning high-pressure one-way valve is a representative of this, using a bypass valve for convenient maintenance without affecting production and processing.

To avoid harm to our lives and bodies, a pneumatic 2-way 2-position solenoid valve should be used carefully in daily life. When purchasing different models of solenoid valves, be sure to read the instruction manual carefully and carry out installation preparation before installation. Even when purchasing products such as a custom normally open high-pressure 2-way valve, attention is needed. When a fault occurs in the water-inlet solenoid valve, it should be stopped immediately, removed, inspected, cleaned, and then put into use. The water-inlet solenoid valve is closely related to people's physical and mental health, and the working condition of the water-inlet solenoid valve must be checked regularly!