SI Cylinder

Specification: 32

Fluid: Air

Bore: 32

Buffer Type: Adjustable Buffer

Material: Aluminum Alloy

How to choose a cylinder?

1. The axial load thrust of the cylinder depends on the actual load condition of the required cylinder.

2. Determine the working pressure of the cylinder based on the air supply conditions.

I. Determination of cylinder inner diameter

II. The determination of the cylinder stroke is based on the cylinder working distance and the stroke ratio of the transmission mechanism. To facilitate installation and commissioning, an appropriate distance should be reserved in the calculated stroke. To ensure supply speed and reduce production costs, standard strokes should be selected whenever possible.

III. Determine the cylinder model according to the different use and installation needs of the finger cylinder assembly.

IV. Select the cylinder buffer structure. Each cylinder is equipped with different damping mechanisms. When selecting a cylinder, the user should base it on the actual load movement; if the loading speed is too high, the cylinder's own damping may be insufficient, so a buffer circuit or external shock absorber should be designed to reduce collision.

V. Determine whether the magnetic couple rodless cylinder is equipped with a magnet, and select a suitable inductive switch according to actual needs.

VI. The cylinder installation method is determined according to the cylinder installation requirements.

VII. Select the cylinder piston rod connection method. After pre-selection, the stability of the long piston rod under large working conditions should be considered based on the cylinder installation position; and its air consumption under running conditions should be verified.