How does a one-way solenoid valve work in a plant facility?

Speaking of one-way solenoid valve many people do not know much, especially the solenoid valve into the water. But it is closely related to our lives. Water purifier, we are all familiar with, that is a water purification equipment auxiliary equipment! Intake pipe one-way solenoid valve, naturally, refers to the amount of water intake, that is, the amount of water intake. Therefore, when there is a problem with the inlet solenoid valve, it is bound to the normal operation of the water purifier, so we must understand its working principle and price!

Inlet one-way solenoid valve is mainly used to control the inlet and outlet water open. In our daily life, the most common is everyone around the water purifier. Next, let's take a look, how this water purifier works.

After starting and turning off the start torsion spring after the one-way solenoid valve supply starts, according to the built-in spring and voltage, so that the start torsion spring becomes tighter and the clogged pipe joints will be directly extended; in use, turn on the solenoid valve, so that the tap water according to the three sides of the inlet pipe is installed in the inlet solenoid valve, convenient after overhaul. Solenoid valve for tap water that is not under pressure.

After the water purification equipment is turned off, the torsion spring will expand, the protruding part is crushed into a concave shape, the one-way solenoid valve connector will seal the entrance, then turn off the inlet solenoid valve, disconnect the tap water into, this will not be able to enter the self-cleaning filter through the sewer of the reverse osmosis membrane, thus, the inlet solenoid valve can not be removed, because once discharged, it will cause a constant influx of wastewater, and also increase the chance of leakage, the affect the normal use of the appliance.

In the inlet pipe one-way solenoid valve, because of the presence of activated carbon powder blocking condition, causing the gate valve to turn off loose, the inlet water is reduced, resulting in a reduction in the flow of pure water, sewage. Just disassemble, clean again, and you can use! Under conventional working conditions, the inlet solenoid valve can only discharge the sewage. Solenoid valve, domestic tap water.

Inlet solenoid valve offer, use the solenoid valve to regulate the water supply.

In daily life, pay attention to the application of household water with a normally open solenoid valve, to prevent the danger to our lives and health. When buying inlet solenoid valve, be sure to read the instructions carefully, and fully prepared before installation. In the inlet pipe one-way solenoid valve abnormalities, if it is a shift solenoid valve then can immediately stop using, disassemble, check, clean up before re-application. Intake pipe solenoid valve is a key factor in relation to physical and mental health, so the intake pipe solenoid valve should be checked frequently.