AC air source treatment unit

Pneumatic is the use of compressed air as a power source, compressed air filter to make it stretch and turn in different production environments. In the use of pneumatic transmission mechanism, the air power source must be connected to the actuator, and in the factory, there are usually many cylinders connected to the air source, these pneumatic finger cylinders with air compressors, mills, air drills, impact plate hand, air transport screw driver, etc., these pneumatic tools are driven by the pressure of air pressure. Currently commonly used triplex air filter, sprayer, pressure reducing valve and other equipment, its structure is complex, high cost, inconvenient to use, low air filtration efficiency.

A pneumatic two-connected parts, which consists of an air filter pressure reducing valve connected by a connection group and a nozzle consisting of a valve body and a valve cap, a spool installed in the body, the air filter pressure reducing valve is equipped with a water cup at the bottom, the nozzle is equipped with a rotating blade inside the nozzle, the nozzle contains an oil cup, a suction mechanism located in the cup, the nozzle has two respectively the The nozzle contains an oil cup, a suction mechanism located in the oil cup, the nozzle has two oil nozzles connecting the oil cup and the outlet respectively. A filter cartridge is further provided inside the valve. An adjusting handwheel is provided at the top of the valve cap, and an adjustable adjusting screw is provided below the adjusting handwheel.