NPT1/4 male thread stainless steel ball valve

Connection form: thread

Material: stainless steel

Valve flap opening height: micro-opening valve

Structure form：spring type

Nominal diameter: 0-12mm (mm)

Applicable media: water, oil, gas and other types of corrosive media

Flow direction: one-way

Shape: Angle type

Pressure environment: high pressure

Type (channel position): right-angle type

Valve body structure: closed

3C valve category: industrial

Stainless steel ball valves are made with a rotating spool that allows the gate valve to pass or block. The stainless steel ball valve uses this principle. It can be closed by 90 degree rotating operation and very small rotating torque, and it is easy to operate. Small size. Lightweight to open and close. Three-way stainless steel ball valve is most importantly it is not easy to be material abrasion and other characteristics, has been widely used.

Stainless steel ball valve models are not, carbon steel ball valve models are different Q41F-10CQ stands for ball valve, 4 means flange connection, 1 means floating, and finally C means the valve material is carbon steel, stainless steel ball valve model Q41F-10PP stainless steel 304 material.

What are the specifications of stainless steel ball valve models?

1. nominal pressure or pressure level: PN1.0-32.0MPa.ANSICLASS150-900.JIS10-20K.

2. Nominal diameter or specification: DN6～900.NPS1/4～36.

Ball valve (ballvalve), the opening and closing member (ball) is driven by the valve stem, and around the ball valve shaft as a rotary motion of the gate valve. It can also be used for fluid regulation and control. The hard seal V-ball valve has a strong shear force between the V-ball core and the metal seat of the spray-welded carbide, which is especially suitable for fibers. Small solid particles and other substances.

Stainless steel ball valve manufacturer's products can not only flexibly control the merging of media in the pipeline. Separation. And the flow direction of the switch. At the same time, any channel can be closed, and then the other two channels can be connected. This gate valve should generally be installed in the pipeline. Ball valve is divided into pneumatic ball valve, electric ball valve and manual ball valve according to the driving method.