MG322H series Normally open type High pressure two-way valve with copper pipe
Type: Normally open
Interface specifications: DN15; G1/2" (4 points); G3/4" (6 points)
Working pressure: 3 ~ 40bar (MAX 50bar)
Optional voltage: DC24V, DC12V, AC220V ~ 230V
Use: The service life of this high pressure solenoid valve can reach several million times, and the response speed is only a few milliseconds. Suitable for high technology equipment, such as PET blowing machine or laser cutting machine, can completely replace the imported 322 H35,322H36 series.
Features: diaphragm seal, beautiful appearance, reliable quality, with high flow rate, simple structure, easy maintenance, waterproof, multiple lines.
High-pressure two-way valves are made of more practical stainless steel or carbon steel materials, and are customized with integral forged, resilient and high-pressure resistant high-pressure check valves. Check valve is a pipeline used to stop the backflow of fluid, stop pumps and motors from reversing, and to drain the liquid from the container. Welded one-way valve can only make the medium flow in one direction, so that it can not flow.
1, one-way high-pressure two-way valve means that the liquid flows only in the direction of the inlet, and can not flow again in the outlet. When installing the check valve, attention should be paid to the flow of the medium to ensure that the direction of flow of the medium is the same as the direction of the arrow on the valve body, otherwise it will prevent the normal flow of the medium. The bottom valve is installed at the bottom of the pump pipeline of the pump.
2、One-way valve is also called reverse valve. One-way valve can automatically open or close the valve according to the flow of the medium itself, to prevent the backflow of liquid. High pressure two-position two-way solenoid valve's is an automatic valve, which prevents the backflow of media, prevent the pump and drive motor inversion, container media discharge.
3, check valve can prevent the oil backflow in the hydraulic system. As the check valve in the closure, will produce water hammer pressure in the pipeline, the valve, pipeline, equipment, especially large diameter pipelines and high-pressure pipelines cause damage, so the attention of the valve selector should be drawn.
Water with normally open solenoid valve product features.
1. Strict non-return testing is conducted on products that can achieve complete non-return.
2. All parts are specially polished and sealed with imported materials to reduce the noise and truly achieve environmental protection and energy saving.
3. Its valve plate and valve seat seals are spray-welded with carbide and have different hardness.
4. It has good sealing, high hardness, good wear resistance, good abrasion resistance and long service life.