Product Center

current position: Home > Product Center > O Series
OU air source treatment duplex

OU air source treatment duplex

  • Category:O Series
  • Browse number:
  • QR code:
  • Release time:2022-11-07 10:58:36
  • Product description
  • Optimized information

Alias of the duplex component: gas handling duplex. So, what role does it play in the aerodynamic system?

The degree of over-consideration in the diconnector is usually between 50~75 microns, and the regulating pressure is between 0.5~10 Mpa. If the filtration accuracy is required to be 5~10 microns, 10~20 microns, 25~40 microns, and the regulating pressure 0.05~0.3 Mpa, 0.05~1 Mpa, the components of the two-section tubeless connection are called diconnectors.

In most pneumatic pressurized systems, the duplex is an essential air source device, and the installation position of compressed air filter is the key to ensure the overall quality of air compression and guarantee its good operation.

Pneumatic triplet structure characteristics in pneumatic technology, the air filter, regulator, nebulizer three gas source processing components combined together, called the pneumatic triplet, used for the barometer air source purification, and will be lowered to the instrument. This gas filter type pressure reducing valve is compact and easy to install, so it can be used with air pressure transmitter, air pressure regulator, valve seat and other products. If the pressure regulating valve of the air filter is made into a single unit, it becomes two parts.

The regulator can stabilize the pressure of the air source to ensure that the air source is in a stable state and will not damage the Fainter dynamic boost (the driving pressure should be less than 8.3 bar), which can reduce the damage to the pneumatic booster or booster device when the pressure of the air source changes suddenly. The filter is used to purify the air source, smg air source pressure reducing valve can make too little water in the compressed air and prevent the water from entering the pneumatic pump with the gas, thus shortening the service life of the pneumatic pump.

The oil mist machine can wet the transmission parts of the air booster pump, so that the lubricated parts can be lubricated, which greatly extends the service life of the air pump.

According to the above introduction, a small duplex, can provide a lot of convenience for the air booster and liquid booster pump in your factory, and the price is low, which is a very wise decision.

Tags

Previous:None

Recently Viewed:

Related products

news.related_news

Ningbo Mingge Pneumatic Technology Co., Ltd

Tel:+86-574-88868991; 

Mobile phone:+86-13626823691

E-mail:mgpc@pneumatics-china.com  mgsales@foxmail.com

NO.28# TONGZHOU ROAD JISHAN INDUSTRY AREA XIKOU TOWN FENGHUA DISTRICT NINGBO CITY ZHEJINAG PROVINCE CHINA

Swipe to consult now

Copyright © NINGBO MINGGE PNEUMATIC TECHNOLOGY CO., LTD All rights reserved record number:浙ICP备20022967号-1 Mainly engaged inSingle-way solenoid valve_Two-position two-way solenoid valve_Normally open solenoid valve, Welcome to inquire!
Technical Support: China Enterprise Cube Disclaimer