MA series stainless steel mini cylinder

Installation and application.

1, small finger cylinder in the work load change, should choose the output power cylinder;.

2, in high temperature, corrosive environment, should choose the corresponding high temperature resistant, corrosion resistant cylinder.

3, in high humidity, high dust, or water droplets, oil dust, welding slag, the use of the cylinder, must take protective measures.

4, before inserting the cylinder into the pipeline, the pipeline should be cleaned to avoid dirt into the cylinder;.

5, the medium used in the cylinder must pass through the filter element more than 40 microns before use.

6, in low temperature conditions, to take effective anti-freeze measures to avoid water freezing in the system.

7, the cylinder should be used before the no-load test, before running to adjust the shock absorber to low, and then gradually loosen to avoid causing excessive impact on the cylinder;.

8, micro rotary cylinder to avoid lateral loading, so as not to bend the piston rod deformation and damage the rod end line

9, the cylinder is removed after a long period of time without use, pay attention to the surface of the anti-rust, inlet and exhaust port to have a dust cover, especially note: the front and rear cover can not be removed. In the return, can not be loaded with a single action type.